•
BODY
•
5. Adjust the headlights to local requirements by
turning the adjusters.
6 . After headlight assembly replacement, it may be
necessary to readjust the horizontal indicator gear
(A).
• First install the headlight, and adjust its
horizontal and vertical aimings according to local
requirements.
• Then check that the arrow on the horizontal
indicator gear is aligned with the mark on the
horizontal indicator.
'01-02 models:
1. Clean the outer lens so that you can see the center
of the headlights (A).
2. Align the center of the headlights to 7.5 m (25 ft)
from the wall or a screen (B), and park the vehicle.
3. Turn the low beams on.
4. Measure the height of the headlights (A) and the
lights should reflect 52 mm (2.1 in.) below
headlight height (B).
(cont'd)
22-99