Engine Oil Pressure Indicator Flasher: - Honda 2002 Accord Manual

Engine Oil Pressure Indicator Flasher:
Cavity
Wire Test condition Test: Desired result Possible cause if result is not obtained
B11 BLK Under all
conditions
Check for continuity to ground:
There should be continuity.
• Poor ground (G503)
• An open in the wire
A24 Fuse/relay
box socket
Ignition switch
ON (II)
Check for voltage to ground:
There should be battery voltage.
• Blown No. 9 (7.5A) fuse in the
driver's under-dash fuse/relay box
• Faulty driver's under-dash fuse/
relay box
B5 WHT/BLU Engine
running
Check for voltage to ground:
There should be battery voltage.
• Faulty charging system
• An open in the wire
B17
YEL/RED
Ignition switch
OFF
Check for continuity to ground:
There should be continuity.
• Faulty engine oil pressure switch
• An open in the wire
B17
YEL/RED
Ignition switch
ON (II)
Check light operation.
If the light does not come on,
attach the YEL/RED terminal to
ground:
Light should come on as the
ignition switch is turned ON (II).
• Blown bulb
• An open in the wire
B17
YEL/RED
Start the
engine.
Check for voltage to ground:
There should be battery voltage.
• Insufficient oil
• Improper lubrication
• Faulty engine oil pressure switch
• A short in the wire
Key Light Timer:
Cavity
Wire
Test condition
Test: Desired result
Possible cause if result is not obtained
BIT
BLK Under all
conditions
Check for continuity to ground:
There should be continuity
• Poor ground (G503)
• An open in the wire
A12
Fuse/relay
box socket
Under all
conditions
Check for voltage to ground:
There should be battery voltage.
• Blown No. 13 (7.5A) fuse in the
passenger's under-dash fuse/
relay box
• An open in the wire
A1 Fuse/relay
box socket
Under all
conditions
Attach to ground:
Ignition key light should come
on.
• Blown No. 47 (20A) fuse in the
under-hood fuse/relay box
• An open in the wire
A16 Fuse/relay
box socket
Driver's door
open
Check for voltage to ground:
There should be 1V or less.
• Faulty driver's door switch
• An open in the wire
Key-in Reminder:
Cavity
Wire
Test condition
Test: Desired result
Possible cause if result is not obtained
B11
BLK Under all
conditions
Check for continuity to ground:
There should be continuity.
• Poor ground(G503)
• An open in the wire
A24
Fuse/relay
box socket
Ignition switch
ON (II)
Check for voltage to ground:
There should be battery voltage.
• Blown No. 9 (7.5A) fuse in the
driver's under-dash fuse/relay box
• Faulty driver's under-dash fuse/
relay box
A16
Fuse/relay
box socket
Driver's door
open
Check for voltage to ground:
There should be 1 V or less.
• Faulty driver's door switch
• An open in the wire
A13 Fuse/relay
box socket
Ignition key is
inserted into
the ignition
switch.
Check for voltage to ground:
There should be 1 V or less.
• Faulty ignition key switch
• Poor ground(G401)
• An open in the wire
22-81