Transmission End Cover
End Cover and Idler Gears Removal (cont'd)
Special Tools Required
Mainshaft holder 07GAB-PF50101 or 07GAB-PF50100
NOTE: Refer to the Exploded View as needed during
this procedure.
1. Remove the transmission range switch cover.
2. Remove the bolts securing the harness clamp (two
bolts), then remove the transmission range switch.
3. Remove the bolts securing the end cover (14 bolts),
then remove the cover.
4. For '00-02 models: Remove the lubrication pitot
pipe (A) and the pitot pipe (B), then remove the
pitot flange (C) from the mainshaft 1st gear (D).
5. Slip the special tool onto the mainshaft.
0 7 G A B - P F 5 0 1 0 1 o r
0 7 G A B - P F 5 0 1 0 0
6. Engage the park pawl with the park gear.
14-150