Honda 2002 Accord Manual page 1133

Bjfl
6. To complete the charts:
• Mark the delivery temperature along the vertical line.
• Mark the intake temperature {ambient air temperature) along the bottom line.
• Draw a line straight up from the air temperature to the humidity.
• Mark a point 10 % above and 10 % below the humidity level.
• From each point, draw a horizontal line across the delivery temperature.
• The delivery temperature should fall between the two lines.
• Complete the low-side pressure test and high-side pressure test in the same way.
• Any measurements outside the line may indicate the need for further inspection.
kPa
(kgf/cm
2
)
psi
2900 n
(20) (25) (30) (35) (40)
(°C)
INTAKE T E M P E R A T U R E
21-45