Honda 2002 Accord Manual page 861

®
NOTE:
• The parking brake cables must not be bent or
distorted. This will lead to stiff operation and
premature failure.
• Refer to the Exploded View as needed during this
procedure.
Rear Disc Brake: (EX Type)
1. Release the parking brake lever fully, and remove
the brake hose clip (A) from the parking brake cable.
C
Rear Drum Brake: (DX and LX Type)
1. Remove the brake shoe assembly (see page 19-27).
2. Remove the parking brake cable mounting bolts
from the backing plate.
3. Remove the parking brake cable (A) from the
backing plate (B) using a 12 mm offset wrench (C).
A
B
2. Disconnect the parking brake cable (B) from the
lever (C).
19-33