Moonroof
Glass Height Adjustment
The roof panel (A) should be even with the glass
weatherstrip (B), to within 2 + 0 . 5 / - 1 mm (0.08 + 0 . 0 2 / -
0.04 in.) all the way around. If not, make the following
adjustment:
B
1. Open the glass all the way,and remove the bracket
cover.
2. Loosen the nuts (A), and install the shims ( B )
between the glass frame (C) and glass bracket (D)
on each side.
Shim thickness: Front and rear max. 2 mm (0.0B in.)
B
C
B
A
6 x 1.0 m m
9 N - m (0.9 k g f m , 7 I b f f t )
3. Repeat on opposite side if necessary.
Glass Replacement
1. Tilt the glass all the way up.
2. Slide the sunshade all the way back.
3. Remove the caps (A) and screws, then remove both
bracket covers (B). Remove the nuts and shims (C)
from both glass brackets (D).
F a s t e n e r L o c a t i o n s
•
: S c r e w , 2
#
: N u t , 4
\
A
4. Remove the moonroof glass by lifting it up. Do not
damage the roof panel.
5. Install the glass in the reverse order of the removal,
and adjust the glass height.
6. Check for water leaks. Use free flowing water from
a hose without a nozzle. Do not use high-pressure
water.
20-62