Table of Contents
Advertisement
S R S
DTC Troubleshooting - '00-02 Models (cont'd)
11. Check resistance between the No. 3 terminal of the
passenger's seat wire harness 3P connector and
body ground. There should be 1 M 0 or more.
P A S S E N G E R ' S S E A T W I R E H A R N E S S
3P C O N N E C T O R
12.
B L U / W H T
- Q )
( Y E L / B L U )
W i r e s i d e o f f e m a l e t e r m i n a l s
Is the resistance
reading
as
specified?
Y E S - G o t o step 12.
NO —Short to ground in the dashboard wire
harness A
f
right side wire harness or passenger's
power seat wire harness (with power seat). Isolate
the faulty harness, and replace as necessary. •
Check resistance between the No. 7 terminal of
S R S unit connector C (BP) and the No. 3 terminal of
the passenger's seat wire harness 3P connector.
There should be 0 - 1 0 .
P A S S E N G E R ' S S E A T
W I R E H A R N E S S
3P C O N N E C T O R
S R S U N I T
C O N N E C T O R C (8P)
1
2
3
4
5
6
7
8
W i r e s i d e o f f e m a l e t e r m i n a l s
13. Check resistance between the No. 3 terminal of
S R S unit connector C (8P) and the No. 2 terminal of
the passenger's seat wire harness 3P connector.
There should be 0—1 Q.
P A S S E N G E R ' S S E A T
W I R E H A R N E S S
3P C O N N E C T O R
S R S U N I T
C O N N E C T O R C (8P)
1
2
3
4
5
6
7
8
W i r e s i d e o f f e m a l e t e r m i n a l s
Is the resistance
as
specified?
Y E S - R e p l a c e the S R S unit.B
NO —Open in the dashboard wire harness A, right
side wire harness, or passenger's seat wire
harness. Isolate the faulty harness, and replace
as necessary. •
Is the resistance
reading
as
specified?
Y E S - G o t o step 13.
NO—Open in the dashboard wire harness A, right
side wire harness, or passenger's seat wire
harness. Isolate the faulty harness, and replace
as necessary. •
23-210
Advertisement
Table of Contents
Troubleshooting
