Table of Contents
Advertisement
Drivetine/Axte
Driveshafts Disassembly (cont'd)
4. Make a mark (A) on the rollers ( B or C) and spider
(D) to identify the locations of rollers on the spider,
t h e m remove the rollers.
NOTE:
• Roller (B) is used on '98-00 A/T models and
all '01-02 models.
• Roller ( C ) is used on '98-00 M/T models.
5. Remove the circlip (E).
6. Mark the spider (D) and driveshaft (F) to identify the
position of the spider on the shaft.
7. Remove the spider.
8. Wrap the splines on the driveshaft w i t h vinyl tape
(A) to prevent damage to the boot and dynamic
damper (for left driveshaft on A/T models and all
right driveshafts).
9. Remove the inboard boot and dynamic damper.
Take care not to damage the boot and dynamic
damper.
10. Remove the vinyl tape.
16-6
Advertisement
Table of Contents
Troubleshooting
