Carburetor Assembly Removal And Installation - Suzuki 2005 GSF1200 Service Manual

Carburetor Assembly Removal and Installation

Removal
1) Remove the seat and frame covers. Refer to
"Exterior Parts Removal and Installation: in Section
9D".
2) Remove the fuel tank. Refer to "Fuel Tank Removal
and Installation: ".
3) Remove the air cleaner box mounting bolts.
4) Disconnect the TP sensor coupler (1).
5) Loosen the respective carburetor clamp screws.
6) Move the air cleaner box backward.
B649G11706002
I649G1170028-01
1
I649G1170029-02
I649G1170030-02
7) Disconnect the carburetor heater lead wire coupler
(2). (For E-02, 19)
8) Remove the thermo-switch (3). (For E-02, 19)
9) Disconnect the starter cable (4) and throttle cables
(5).
10) Disconnect the vacuum hose (6).
11) Remove the carburetor assembly.
4
5
Installation
Install the carburetor assembly in the reverse order of
removal. Pay attention to the following points:
• Position the carburetor clamps as shown.
Fuel System: 1G-19
3
2
I649G1170031-02
6
I649G1170032-01
I649G1170033-01