Suzuki 2005 GSF1200 Service Manual page 118

1D-50 Engine Mechanical:
• Install the gearshift cam (3) and its related parts.
– Gearshift cam stopper (4)
– Snap ring (5)
– Spring (6)
– Snap ring (7)
CAUTION
!
Always use new snap rings ((5) and (7)).
Special tool
(A): 09900–06106 (Snap ring pliers)
5
• Position the gearshift cam in the neutral position as
shown. This will allow the gearshift forks and
transmission gears to be installed easily.
6
4
3
I649G1140145-01
(A)
7
I649G1140146-02
I649G1140147-01
• Install the gearshift forks into the crankcase in the
correct position and direction.
– For the 6th (Top) driven gear (8)
– For the 3rd/4th drive gear (9)
– For the 5th driven gear (10)
9
8
• Hold the gearshift forks (11) by hand when installing
the gearshift fork shaft (12).
11
• Install the bearing pins (13) and C-rings (14) into the
upper crankcase.
14
13
10
I649G1140148-02
12
I649G1140149-01
13
14
I649G1140150-02