1J-1 Charging System:
Charging System
Charging System Description (Generator with IC Regulator)
The generator features a solid-state regulator that is mounted inside the generator. All regulator components are
enclosed into a solid mold, and this unit is attached to the brush holder frame. The regulator voltage setting cannot be
adjusted.
Two brushes carry current through the two slip rings to the rotor coil which is mounted on the rotor.
The stator windings are assembled on the inside of a laminated core that forms part of the generator housing. A
rectifier bridge, which is connected to the stator windings, contains eight diodes, and electrically changes the stator
A.C. voltage to D.C. voltage which appears at the generator output terminal.
1. Rotor
2. Rotor coil
3. Stator coil
General Description
1
2
3
Stator coil
Rotor coil
E
4. Slip rings
5. Brushes
6. IC regulator
B
5
6
P
4
B
Ignition switch
IG
IG
B
P
F
IC
E
6
7. Brush holder
B: Battery terminal
E: Ground
IG
7
F
F: Rotor coil terminal
IG: Ignition terminal
P: Stator coil terminal
B649G11A01001
B
B
I649G11A0001-01