Suzuki 2005 GSF1200 Service Manual page 112

1D-44 Engine Mechanical:
2) Remove the washers (2), oil pump driven gear (3)
and pin (4).
NOTE
Be careful not to drop the circlip, pin and
washers into the oil pan.
2
3
Starter Clutch
1) Remove the starter clutch component parts (1).
Refer to "Starter Clutch Removal and Installation: in
Section 1I".
1
Gear Position Switch
1) Flatten the tabs on the oil seal retainer and remove
the bolts.
2) Remove the oil seal retainer (1).
1
2
4
I649G1140112-02
I649G1140113-03
I649G1140116-01
3) Remove the gear position switch (2).
4) Remove the O-ring (3), switch contact (4) and spring
(5).
NOTE
Do not lose the O-ring, switch contact and
spring.
Crankcase
1) Remove the countershaft bearing retainer (1).
2
I649G1140117-01
3
5
4
I649G1140118-01
1
I649G1140119-01