Starting System
Starting System Diagram
Refer to "Wire Color Symbols: in Section 0A".
The starter system consists of the following components: the starter motor, starter relay, clutch lever position switch,
turn signal/side-stand relay, side-stand switch, gear position switch, starter button, engine stop switch, ignition switch
and battery. Pressing the starter button (on the right handlebar switch) energizes the starter relay, causing the contact
points to close, thus completing the circuit from the starter motor to the battery. The starter motor draws about 80 A to
start the engine.
Starter
motor
Starter relay
Side-stand / Ignition Interlock System Description
Refer to "Wire Color Symbols: in Section 0A".
This side-stand/ignition interlock system prevents the motorcycle from being started with the side-stand down. The
system is operated by an electric circuit provided between the battery and ignition coil.
Fuse (30 A)
R
Battery
General Description
Bl/B
B/Y
Clutch lever
position switch
B/W
Ignition
Fuse
switch
(15 A)
B/R
B/O
Fuse
(15 A)
Neutral
indicator light
Engine stop
switch
B/Bl
Starter
button
Turn signal/
side-stand relay
Turn signal/
Engine stop
side-stand relay
O/Y
B/Bl
Bl
Bl/B
Gear
position
switch
Starting System:
B649G11901001
Ignition
switch
Fuse (30 A)
B/R
B/O
Gear
Fuse
position
(15 A)
switch
Bl
G
Side-stand
switch
B649G11901002
switch
B/R
To ignitor
and ignition
coil
G
Side-stand
switch
1I-1
I649G1190001-01
I649G1190002-01