Rear Turn Signal Light Removal and Installation
Removal
1) Remove the seat. Refer to "Exterior Parts Removal
and Installation: in Section 9D".
2) Remove the tool set (1) and disconnect the turn
signal light coupler (2).
1
3) Remove the turn signal light (3) by removing the nut.
3
Installation
Install the rear turn signal light in the reverse order of
removal.
B649G19206023
2
I649G1920031-01
I649G1920032-01
Turn Signal Light Bulb Replacement
CAUTION
!
If you touch the bulb with your bare hands,
clean the bulb with a cloth moistened with
alcohol or soapy water to prevent premature
bulb failure.
1) Remove the lens by removing the screw.
2) Replace the bulb (1).
1
3) Install the lens.
Lighting Systems:
9B-9
B649G19206024
I649G1920033-01
I649G1920034-01