Ignition Coil and Spark Plug Cap Components
#3
#2
Spark Plug Removal and Installation
Refer to "Spark Plug Removal and Installation: in
Section 0B".
Spark Plug Inspection and Cleaning
Refer to "Spark Plug Inspection and Cleaning: in
Section 0B".
Ignition Coil Inspection
Refer to "Electrical Components Location: in Section
0A".
Ignition Coil Primary Peak Voltage
1) Remove the fuel tank. Refer to "Fuel Tank Removal
and Installation: in Section 1G".
2) Disconnect all the spark plug caps.
3) Connect new spark plugs (1) to each spark plug cap
and ground them on the cylinder.
Repair Instructions
#4
#1
1. Frame
2. Plug cap cover
B649G11806017
B649G11806018
B649G11806008
1
3
3. Plug cap
NOTE
Be sure that all the spark plugs are
connected properly and the battery used is in
fully-charged condition.
Ignition System:
1H-4
B649G11806007
2
I649G1180002-04
1
I649G1180003-01