Suzuki 2005 GSF1200 Service Manual page 344

5B-6 Manual Transmission:
• Install the gearshift cam (2) and its related parts.
CAUTION
!
Always use new snap rings ((4) and (6)).
Special tool
(A): 09900–06107 (Snap ring pliers)
4
2. Gearshift cam
3. Gearshift cam stopper
4. Snap ring
• Position the gearshift cam in the neutral position as
shown.
NOTE
This will allow the gearshift forks and
transmission gears to be installed easily.
5
3
2
I649G1520021-01
(A)
6
I649G1520022-02
5. Spring
6. Snap ring
I649G1520023-01
Gearshift Fork
• Install the gearshift forks into the crankcase in the
correct position and direction.
2
1
1. For the 4th driven gear
2. For the 3rd drive gear
3. For the 5th (Top) driven gear
• Hold the gearshift forks by hand when installing the
gearshift fork shaft (4).
3
I649G1520024-01
4
I649G1520025-02