Suzuki 2005 GSF1200 Service Manual page 90

1D-22 Engine Mechanical:
• Each camshaft journal holder is identified with an embossed letter and install the dowel pins into each camshaft
journal holder.
• Have the camshaft journal holders seated (IN and EX) evenly by tightening the camshaft journal holder bolts
sequentially and in a crisscross pattern.
CAUTION
!
The camshaft journal holder bolts are made of a special material and much superior in strength,
compared with other types of high strength bolts.
Take special care not to use other types of bolts.
NOTE
Damage to the cylinder head or camshaft journal holder thrust surfaces may result if the camshaft
journal holders are not tightened evenly.
• Tighten the camshaft journal holder bolts to the specified torque.
Tightening torque
Camshaft journal holder bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
• Pour about 50 ml of engine oil into each oil pocket in the cylinder head.
FWD
I649G1140077-01
I649G1140076-01