Cam Chain Guide Removal And Installation - Suzuki 2005 GSF1200 Service Manual

1D-28 Engine Mechanical:
1) Apply THREAD LOCK SUPER "1303" to the threads
of the camshaft sprocket bolts and then tighten them
to the specified torque.
: Thread lock cement 99000–32030 (Thread
Lock Cement Super 1303 or equivalent)
Tightening torque
Camshaft sprocket bolt: 25 N·m (2.5 kgf-m, 18.0
lb-ft)
2) Install the camshafts. Refer to "Engine Top Side
Assembly: ".
Cam Chain Tension Adjuster Inspection
The cam chain tension adjuster is maintained at the
proper tension by an automatically adjusted.
1) Remove the cam chain tension adjuster. Refer to
"Engine Top Side Disassembly: ".
2) Unlock the ratchet mechanism (1) and move the
push rod (2) in place to see if it slides smoothly. If it
does not slide smoothly or the ratchet mechanism is
worn or damaged, replace the cam chain tension
adjuster with a new one.
1
3) Install the cam chain tension adjuster. Refer to
"Engine Top Side Assembly: ".
I649G1140208-01
B649G11406051
2
I649G1140209-02

Cam Chain Guide Removal and Installation

Removal
1) Remove the cylinder head cover. Refer to "Engine
Top Side Disassembly: ".
2) Remove the breather cover (1).
1
3) Remove the cam chain guide No.2 (2) from the
cylinder head cover.
4) Remove the intake and exhaust camshafts. Refer to
"Engine Top Side Disassembly: ".
5) Remove the cam chain guide No.1 (3).
6) Remove the cam chain guide No.3 (4) by removing
the mounting bolt.
B649G11406068
I649G1140313-01
2
I649G1140314-01
3
I649G1140315-01
4
I649G1140316-01