1D-46 Engine Mechanical:
12) Make sure that all of the bolts are removed. Then,
tap the sides of the lower crankcase using a plastic
mallet to separate the upper and lower crankcase
halves and then lift the lower crankcase off of the
upper crankcase.
CAUTION
!
Do not allow the crankshaft journal bearings
to drop out of the lower crankcase.
NOTE
If it is difficult to separate the crankcase
halves, set the proper bolt and nut to the
crankcase by separating the upper and lower
crankcase halves, as shown in the
illustration.
Crankshaft
1) Remove the crankshaft assembly (1) from the upper
crankcase.
2) Remove the thrust bearings (2).
NOTE
The crankshaft thrust bearings (2) are located
between the crankshaft assembly and upper
crankcase.
I649G1140127-01
Cam Chain Tensioner
1) Remove the dampers (3) and cam chain tensioner
(4).
2) Remove the O-rings ((5) and (6)).
I649G1140128-01
1
5
3
4
2
I649G1140129-01
6
I649G1140130-01