6B-5 Steering / Handlebar:
Steering Removal and Installation
Removal
GSF1200
1) Support the motorcycle with a jack or a wooden
block.
2) Remove the front wheel assembly. Refer to "Front
Wheel Assembly Removal and Installation: in
Section 2D".
3) Remove the front forks. Refer to "Front Fork
Removal and Installation: in Section 2B".
4) Remove the headlight. Refer to "Headlight Removal
and Installation: in Section 9B".
5) Disconnect the couplers.
6) Remove the headlight housing (1).
7) Remove the headlight housing brackets (2).
8) Remove the brake hose clamp (3).
9) Remove the combination meter unit (4).
2
3
10) Remove the ignition switch (5) using the special
B649G16206012
11) Dismount the handlebars by removing the handlebar
1
12) Remove the steering stem head nut and washer.
13) Remove the steering stem upper bracket (6).
I649G1620012-03
4
2
I649G1620013-02
tools.
Special tool
(A): 09930–11920 (Torx bit (JT 40H))
(B): 09930–11940 (Bit holder)
holder set nuts.
NOTE
Place a rag on the fuel tank to prevent the
fuel tank scratched.
(A)
5
(B)
I649G1620014-04
6
I649G1620015-02