Hazard Switch Inspection; Turn Signal Switch Inspection; Passing Light Switch Inspection - Suzuki 2005 GSF1200 Service Manual

Hazard Switch Inspection

Inspect the hazard switch in the following procedures:
1) Remove the right frame head cover. (GSF1200)
Refer to "Exterior Parts Removal and Installation: in
Section 9D".
2) Disconnect the left handlebar switch coupler (1).
3) Inspect the hazard switch for continuity with a tester.
If any abnormality is found, replace the left
handlebar switch assembly with a new one. Refer to
"Handlebars Removal and Installation: in Section
6B".
Special tool
: 09900–25008 (Multi-circuit tester set)
Tester knob indication
Continuity ( )
Color
B
Position
OFF
ON
4) After finishing the hazard switch inspection, reinstall
the removed parts.

Turn Signal Switch Inspection

Inspect the turn signal switch in the following
procedures:
1) Remove the right frame head cover. (GSF1200)
Refer to "Exterior Parts Removal and Installation: in
Section 9D".
2) Disconnect the left handlebar switch coupler (1).
B649G19206028
1
I649G1920036-01
B/Br B/G
I649G1920040-01
B649G19206029
1
I649G1920036-01
3) Inspect the turn signal switch for continuity with a
tester. If any abnormality is found, replace the left
handlebar switch assembly with a new one.
Refer to "Handlebars Removal and Installation: in
Section 6B".
Special tool
: 09900–25008 (Multi-circuit tester set)
Tester knob indication
Continuity ( )
Color
B/G
Position
L
PUSH
R
4) After finishing the turn signal switch inspection,
reinstall the removed parts.

Passing Light Switch Inspection

Inspect the passing light switch in the following
procedures:
1) Remove the right frame head cover. (GSF1200)
Refer to "Exterior Parts Removal and Installation: in
Section 9D".
2) Disconnect the left handlebar switch coupler (1).
3) Inspect the passing light switch for continuity with a
tester.
If any abnormality is found, replace the left
handlebar switch assembly with a new one.
Refer to "Handlebars Removal and Installation: in
Section 6B".
Special tool
: 09900–25008 (Multi-circuit tester set)
Tester knob indication
Continuity ( )
Color
G/B
Position
PUSH
Lighting Systems:
B/Br B
I649G1920037-01
B649G19206030
1
I649G1920036-01
Dg
I649G1920038-01
9B-11