Show Interfaces Configuration - Planet Networking & Communication WSGW-24020 User Manual

Syntax
set interface active {ethernet interface | port-channel port-channel-number}
interface — Valid Ethernet port.
port-channel-number — Valid port-channel trunk index.
Default Configuration
This command has no default configuration.
Command Mode
Privilege EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example activates interface e5, which is disabled.
console# set interface active ethernet e5

5.7.14 show interfaces configuration

The show interfaces configuration Privilege EXEC mode command displays the configuration for all configured interfaces.
Syntax
show interfaces configuration [ethernet interface | port-channel port-channel-number | ]
Interface — Valid Ethernet port.
port-channel-number — Valid port-channel trunk index.
oob-interface — Out-of-band Ethernet port number.
Default Configuration
This command has no default configuration.
Command Modes
Privilege EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the configuration for all configured interfaces:
console# show interfaces configuration
User's Manual of WGSW-24020/WGSW-48040
-19