Planet Networking & Communication WSGW-24020 User Manual page 307

Console> 'Ctrl-shift-6' ?
[Special telnet escape help]
Esc B sends telnet BREAK
Esc C sends telnet IP
Esc H sends telnet EC
Esc O sends telnet AO
Esc T sends telnet AYT
Esc U sends telnet EL
Several concurrent Telnet sessions can be opened and switched between them. To open a subsequent session, the current
connection needs to be suspended, by pressing the escape sequence 'Ctrl-Shift-6' and 'x' to return to the system command
prompt. Then open a new connection with the telnet command.
If you want to login to host on the out-of-band port, use the out-of-band IP address format: oob/ip-address.
Keywords Table
Options Description
/echo Enables local echo
/quiet Prevents onscreen display of all messages from the software
/source-interface Specifies the source interface.
/stream Turns on stream processing, which enables a raw TCP stream with no Telnet control sequences.
A stream connection does not process Telnet options and can be appropriate for connections to
ports running UNIX-to-UNIX Copy Program (UUCP) and other non-Telnet protocols.
Ports Table
Keyword Description
bgp Border Gateway Protocol
chargen Character generator
cmd Remote commands
daytime Daytime
discard Discard
domain Domain Name Service
echo Echo
exec Exec
finger Finger
User's Manual of WGSW-24020/WGSW-48040
Port number
179
19
514
13
9
53
7
512
79
-30