Show Bridge Address-Table Static - Planet Networking & Communication WSGW-24020 User Manual

Example
In this example, all classes of entries in the bridge-forwarding database are displayed.
console# show bridge address-table
Aging time is 250 sec
vlan mac address
----- -------------------
1 0060.704C.73FF
1 0060.708C.73FF
200 0010.0D48.37FF

5.4.14 show bridge address-table static

The show bridge address-table static privileged EXEC command displays statically created entries in the bridge-forwarding
database.
Syntax
show bridge address-table static [vlan vlan] [ethernet interface | port-channel port-channel-number]
vlan — Specific valid VLAN, such as VLAN 1.
interface — A valid Ethernet port.
port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, all static entries in the bridge-forwarding database are displayed.
console# show bridge address-table static
Aging time is 300 sec
vlan mac address
------ --------------------
1 0060.704C.73FF
1 0060.708C.73FF
200 0010.0D48.37FF
User's Manual of WGSW-24020/WGSW-48040
port type
------ --------
e8 dynamic
e8 dynamic
e8 static
port type
------ -------
e8 permanent
e8 delete-on-timeout
e8 delete-on-reset
-16