Table of Contents
Advertisement
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In the following example, the counters for interface g1 are cleared.
Console> clear counters ethernet g1
3.7.13 set interface active
The set interface active privileged EXEC mode command reactivates an interface that was suspended by the system.
Syntax
set interface active {ethernet interface | port-channel port-channel-number}
§
interface — Valid Ethernet port.
§
port-channel-number — Valid port-channel trunk index.
Default Configuration
This command has no default configuration.
Command Mode
Privilege EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example activates interface g5, which is disabled.
Console> set interface active ethernet g5
3.7.14 show interfaces configuration
The show interfaces configuration Privilege EXEC mode command displays the configuration for all configured
interfaces.
Syntax
show interfaces configuration [ethernet interface | port-channel port-channel-number | out-of-band-eth
oobinterface]
Interface — Valid Ethernet port.
§
§
port-channel-number — Valid port-channel trunk index.
§
oob-interface — Out-of-band Ethernet port number.
Default Configuration
This command has no default configuration.
Command Modes
Privilege EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the configuration for all configured interfaces:
51
Advertisement
Table of Contents
