Table of Contents
Advertisement
values: none, log, trap, log-trap. In the case of log, an entry is made in the log table for each
event. In the case of trap, an SNMP trap is sent to one or more management stations.
Community
If an SNMP trap is to be sent, it is sent to the SNMP community specified by this octet string.
Owner
The entity that configured this event.
Last time sent
The time this entry last generated an event. If this entry has not generated any events, this
value is zero.
5.19.10 show rmon log
The show rmon log user EXEC command displays the RMON logging table.
Syntax
show rmon log [event]
event — Event index. (Range: 0 - 65535)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the RMON logging table.
Console# show rmon log
Maximum table size: 500
Event
Description
---------
-----------------
1
Errors
1
Errors
2
High Broadcast
Console# show rmon log
Maximum table size: 500 (800 after reset)
Event
---------
Time
---------
Jan 18 2002 23:48:19
Jan 18 2002 23:58:17
Jan 18 2002 23:59:48
Description
----------------
User's Manual of WGSW-24020/WGSW-48040
Time
---------
-27
Advertisement
Table of Contents
