Planet Networking & Communication WSGW-24020 User Manual page 62

■
Create Permit ACL and add to list
5. [Permit Rule]: Within the same ACL "Deny-IP Destination A", choose "Action"—"Permit".
6. [Permit Rule]: Keep the "Source IP Address" and "Wild Card Mask" be blanked.
7. [Permit Rule]: Keep the "Destination IP Address" and "Wild Card Mask" be blanked.
8. After click "Add to List" button, the entry would be show at the table.
9. Rember to click the "Save Config" button.
■
Binding the IP ACL to specify interface
10. Select "Security" \"ACL Binding" in the Menu bar.
11. Choose Port "g1" at the Interface.
12. Choose "IP Based ACL", select ACL name with "Deny-Source A" – that we had been created at step-1. Click
"Add to List" button, the entry would be show at the table.
User's Manual of WGSW-24020/WGSW-48040
-62-