Planet Networking & Communication WSGW-24020 User Manual page 122

Contains a list of user-defined SNMP groups. SNMP groups are defined in the
Group Name
SNMP Group Profile page.
Indicates the Authentication method used. The possible field values are:
Authentication
• None, that no authentication method is used to authenticate the port.
Method
• MD5 Password, that port authentication is performed via HMAC-MD5-96
• SHA Password, that port authentication is performed via HMAC-SHA-96
• MD5 Key, that port authentication is performed via the HMAC-MD5 algorithm.
• SHA Key, that port authentication is performed via HMAC-SHA-96
Define the local user password. Local user passwords can contain up to 159
Password
characters.
Define the HMAC-MD5-96 or HMAC-SHA-96 authentication level. The
Authentication Key
authentication and privacy keys are entered to define the authentication key.
If only authentication is required, 16 bytes are defined.
If both privacy and authentication are required, 32 bytes are defined.
Each byte in hexadecimal character strings is two hexadecimal digits. Each byte
can be separated by a period or a colon.
Defines the Privacy Key (LSB).
Privacy Key
If only authentication is required, 20 bytes are defined.
If both privacy and authentication are required, 36 bytes are defined.
Each byte in hexadecimal character strings is two hexadecimal digits. Each byte
can be separated by a period or colon.
Use the
the bottom of the screen.
password authentication.
password authentication.
authentication.
button when you want to add the Group Membership configuration to the respective table at
-12
User's Manual of WGSW-24020/WGSW-48040