To defined "Permit", "Deny" or "Shutdown" from Action item.
4.
[Deny Rule]: Input Source MAC Address "00:11:08:57:E0:1E" with Wild Card Mask "00:00:00:00:00:00".
5.
[Deny Rule]: Enter Dest. Mac Address "00:30:4F:1D:9F:DE" with Wild Card Mask "00:00:00:00:00:00".
6.
[Deny Rule]:Input the VLAN ID and default VLAN ID is 1.
7.
Press "Add to List" button to complete this setting.
8.
■ Create Permit MAC ACL and add to list (
9.
[Permit Rule]: Within the same ACL "Deny-MAC A", choose "Action"—"Permit".
10.
[Permit Rule]: Keep the "Source MAC Address" and "Wild Card Mask" be blanked.
11.
[Permit Rule]: Keep the "Destination MAC Address" and "Wild Card Mask" be blanked.
12.
After click "Add to List" button, the entry would be show at the table.
To allow all other packets be forwarded)
-66-
User's Manual of WGSW-24020/WGSW-48040