5.4.15 show bridge address-table count
The show bridge address-table count privileged EXEC command displays the number of addresses present in all VLANs or
at a specific VLAN.
Syntax
show bridge address-table count [vlan vlan]
vlan — Specific VLAN.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, the number of addresses present in the VLANs are displayed.
console# show bridge address-table count
Capacity: 8192
Free: 8084
Used: 108
Secure: 0
Dynamic addresses: 97
Static addresses: 2
Internal addresses: 9
vlan
Dynamic
------
--------------
1
75
19
22
5.4.16 show bridge multicast address-table
The show bridge multicast address-table privileged EXEC command displays multicast MAC address table information.
Syntax
show bridge multicast address-table [vlan vlan-id] [address mac-multicast-address | ip-multicast-address] [format ip | mac]
vlan_id — A VLAN ID value.
mac-multicast-address — A MAC multicast address.
ip- multicast-address — An IP multicast address.
format — Multicast address format. Can be ip or mac. If format is unspecified, the default is mac.
Static
---------
1
1
-16
User's Manual of WGSW-24020/WGSW-48040