Show Management Access-Class; Phy Diagnostics Commands; Test Copper-Port Tdr - Planet Networking & Communication WSGW-24020 User Manual

5.13.6 show management access-class

The show management access-class privileged EXEC command displays the active management access-list.
Syntax
show management access-class
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the management access-list information.
Console# show management access-class
Management access-class is enabled, using access list mlist

5.14 PHY Diagnostics Commands

5.14.1 test copper-port tdr

The test copper-port tdr privileged EXEC command diagnoses with TDR (Time Domain Reflectometry) technology the quality
and characteristics of a copper cable attached to a port.
Syntax
test copper-port tdr interface
interface — A valid Ethernet port.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
The port can only be tested if cable is connected to both sides.
User's Manual of WGSW-24020/WGSW-48040
-23