Planet Networking & Communication WSGW-24020 User Manual page 77

Setting Timer
On this screen, it includes port, re-authentication, resending EAP .... (Refer to figure 4-33)
The Page contains the following fields:
Quiet Period
Resending EAP
Max EAP Requests
Supplicant Timeout
Server Timeout
Figure 4-33 Setting Timer parameter screen
Specifies the number of seconds that the switch remains in the quiet state
following a failed authentication exchange.
(Range: 0-65535).
Specifies the number of seconds that the switch waits for a response to an EAP -
request/ identity frame, from the supplicant (client), before resending the
requests.
Which the total amount of EAP requests sent. If a response is not received after
the defined period, the authentication process is restarted.
The field default is 2 retries.
Which displays the number of seconds that lapses before EAP requests are
resent to the supplicant (Range: 1-65535).
The field default is 30 seconds.
Which specifies the number of seconds that lapses before the switch resends a
request to the authentication server (Range: 1-65535).
The field default is 30 seconds.
-77-
User's Manual of WGSW-24020/WGSW-48040