Planet Networking & Communication WSGW-24020 User Manual page 64

The Page contains the following fields:
ACL Name
New ACL Name
Delete ACL
Action
Source MAC Address Matches the source MAC address to which packets are addressed to the ACE.
Wildcard Mask
Dest. MAC Address
VLAN ID
Ether Type
Use the "
Add to List
the screen.
Displays the user-defined MAC based ACLs
Specifies a new user-defined MAC based ACL name.
By which deletes the selected ACL
Indicates the ACL forwarding action. Possible field values are:
• Permit, by which forwards packets which meet the ACL criteria.
• Deny, drops packets which meet the ACL criteria.
• Shutdown, where drops packet that meet the ACL criteria, and disables the
port to which the packet was addressed.
Defines the source IP address wildcard mask. Wildcard masks specify which bits
are used and ignored.
A wild card mask of 255.255.255.255 indicates that no bit is important.
A wildcard of 0.0.0.0 indicates that all the bits are important.
For example, if the source IP address 149.36.184.198 and the wildcard mask is
255.36.184.00, the first eight bits of the IP address are ignored, while the last eight
bits are used.
Where matches the destination MAC address to which packets are addressed to
the ACE.
Wildcard Mask, which defines the destination IP address wildcard mask.
Which matches the packet's VLAN ID to the ACE.
The possible field values are 2 to 4094.
Where specifies the packet's Ethernet type.
" button to add the configured MAC Based ACLs to the MAC Based ACL Table at the bottom of
User's Manual of WGSW-24020/WGSW-48040
-64-