Planet Networking & Communication WSGW-24020 User Manual page 103

Indicates the port contribution to the root path cost. The path cost is adjusted to a
Path Cost
higher or lower value, and is used to forward traffic when a path being rerouted.
Value Rage : 1-20000000.
Default Path Cost - The default path cost of the port is automatically set by the
port speed and the default path cost method. The default values for path costs are:
When selected the default path cost is implemented.
Default Path Cost
Indicates priority value of the port. The priority value influences the port choice
Priority
when a bridge has two ports connected in a loop. The priority value is between 0
-240. The priority value is provided in increments of 16.
Designated Bridge ID Indicates the bridge priority and the MAC Address of the designated bridge.
Indicates the selected port's priority and interface.
Designated Port ID
Where indicates the cost of the port participating in the STP topology. Ports with a
Designated Cost
lower cost are less likely to be blocked if STP detects loops.
This indicates the number of times the port has changed from the Blocking state to
Forward Transitions
Forwarding state.
- Ethernet - 2000000
- Fast Ethernet - 200000
- Gigabit Ethernet - 20000
-10
User's Manual of WGSW-24020/WGSW-48040