4.11.6 Notification Filter
The Notification Filter screen (see figure 4-67) permits filtering traps based on OIDs. Each OID is linked to a device feature or a
feature aspect. The Notification Filter screen also allows network managers to filter notifications.
The page contains the following fields:
Filter Name
New Filter Name
New Object Identifier
Subtree
Filter Type
Excluded
Included
Use the
Table at the bottom of the screen.
Figure 4-67 Notification Filter screen
This contains a list of user-defined notification filters.
Add a new user-defined notification filter name.
Displays the OID for which notifications are sent or blocked. If a filter
is attached to an OID, traps or informs are generated and sent to the
trap recipients. Object IDs are selected from either the Select from
List or the Object ID List. There are two configuration options:
Select from List, select the OID from the list provided.
Object ID, you can enter an OID not offered in the Select from List
option.
Indicates if informs or traps are sent regarding the OID to the trap
recipients.
Restricts sending OID traps or informs.
Sends OID traps or informs.
button when you want to add the Notification Filter configuration to the Notification Filter
-12
User's Manual of WGSW-24020/WGSW-48040