Key-String - Planet Networking & Communication WSGW-24020 User Manual

Console(config-pubkey-chain)# user-key bob
Console(config-pubkey-key)# key-string rsa
AAAAB3NzaC1yc2EAAAADAQABAAABAQCvTnRwPWl

5.22.8 key-string

The key-string SSH public key-string configuration command manually specifies a SSH public key.
Syntax
key-string text
text — Authentication string that must be sentand received in the packets, using the routing protocol being authenticated.
The string can contain from 1 to 16 uppercase and lowercase alphanumeric characters.
Default Configuration
By default, the keys do not exist.
Command Mode
SSH Public Key-string configuration
User Guidelines
Use the key-string row command to specify the SSH public key row by row. Each row must begin with the keystring row
command. This command is useful for configuration files.
UU-encoded DER format is the same format in authorized_keys file used by OpenSSH.
Example
The following example enters public key strings for SSH public key clients called "bob".
Console(config)# crypto key pubkey-chain ssh
Console(config-pubkey-chain)# user-key bob rsa
Console(config-pubkey-key)# key-string rsa
AAAAB3NzaC1yc2EAAAADAQABAAABAQCvTnRwPWl
Al4kpqIw9GBRonZQZxjHKcqKL6rMlQ+
ZNXfZSkvHG+QusIZ/76ILmFT34v7u7ChFAE+
Vu4GRfpSwoQUvV35LqJJk67IOU/zfwOl1g
kTwml75QR9gHujS6KwGN2QWXgh3ub8gDjTSq
muSn/Wd05iDX2IExQWu08licglk02LYciz
+Z4TrEU/9FJxwPiVQOjc+KBXuR0juNg5nFYsY
0ZCk0N/W9a/tnkm1shRE7Di71+w3fNiOA
6w9o44t6+AINEICBCCA4YcF6zMzaT1wefWwX6f+
User's Manual of WGSW-24020/WGSW-48040
-29