Logging Buffered; Logging Buffered Size - Planet Networking & Communication WSGW-24020 User Manual

5.24.4 logging buffered

The logging buffered global configuration command limits syslog messages displayed from an internal buffer based on severity.
To cancel the buffer use, use the no form of this command.
Syntax
logging buffered level
no logging buffered
level — Limits the message logging to a specified level buffer: emergencies, alerts, critical, errors, warnings,
notifications, informational, debugging.
Default Configuration
The default level is informational.
Command Mode
Global Configuration mode
User Guidelines
All the syslog messages are logged to the internal buffer. This command limits the commands displayed to the user.
Example
The following example limits syslog messages displayed from an internal buffer based on the severity level "debugging".
Console (config)# logging buffered debugging

5.24.5 logging buffered size

The logging buffered size global configuration command changes the number of syslog messages stored in the internal buffer.
To return the number of messages stored in the internal buffer to the default value, use the no form of this command.
Syntax
logging buffered size number
no logging buffered size
number — Numeric value indicating the maximum number of messages stored in the history table. (Range: 20 - 400)
Default Configuration
The default number of messages is 200.
User's Manual of WGSW-24020/WGSW-48040
-31