4.12.7 Save Configuration
On this screen, you can choose two methods to save the configuration: Via TFTP Upgrade and Via HTTP. See figure 4-76
The page contains the following fields:
Via TFTP
Via TFTP Upgrade
TFTP Server
Source File
Destination File
Via HTTP
This HTTP Firmware Upgrade screen is used for saving configuration information using your Web browser. See figure 4-77
Upgrade
Figure 4-76 Save Configuration via TFTP
Select this option to upgrade the switch from a file located on a TFTP Server.
The TFTP Server IP Address that contains the source files to upgrade from.
Specifies the name of the upgrade file on the TFTP Server.
Where specifies the name of the configuration file. The default is StartupCfg.
Figure 4-77 Save Configuration via HTTP
Select this option to upgrade the switch from a file on the local hard drive.
-13
User's Manual of WGSW-24020/WGSW-48040