Name; Switchport Mode - Planet Networking & Communication WSGW-24020 User Manual

User Guidelines
Commands under the interface range context are executed independently on each interface in the range. If the command
returns an error on one of the interfaces, an error message is displayed and execution continues on other interfaces.
Example
The following example groups VLAN 221 until 228 and VLAN 889 to receive the same command.
Console (config)# interface range vlan 221-228,889
Console (config-if)#

5.27.6 name

The name interface configuration command adds a name to a VLAN. To remove the VLAN name use the no form of this
command.
Syntax
name string
no name
string — Unique name, up to 32 characters in length, to be associated with this VLAN.
Default Configuration
No name is defined.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
The VLAN name should be unique.
Example
The following example names VLAN number 19 with the name "Marketing".
Console (config)# interface vlan 19
Console (config-if)# name Marketing

5.27.7 switchport mode

The switchport mode interface configuration command configures the VLAN membership mode of a port. To reset the mode to
the appropriate default for the device, use the no form of this command.
User's Manual of WGSW-24020/WGSW-48040
-33