Hostname; Show Users - Planet Networking & Communication WSGW-24020 User Manual

User's Manual of WGSW-24020/WGSW-48040

5.23.6 hostname

The hostname global configuration command specifies or modifies the device host name. To remove the existing host name,
use the no form of the command.
Syntax
hostname name
no hostname
name — The device host name.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example specifies the device host name.
Console (config)# hostname abc

5.23.7 show users

The show users user EXEC command displays information about the active users.
Syntax
show users
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
-31