Communities - Planet Networking & Communication WSGW-24020 User Manual

4.11.5 Communities

The Communities screen contains three areas:
• Communities
• Basic Table
• Advanced Table
The screens in Figure 4-65 and 4-66 sppears
Communities
The page contains the following fields:
SNMP Management
Station
Community String
Basic
Advanced
Use the
bottom of the screen.
Figure 4-65 Communities configuration screen
Defines the management station IP address for which the advanced SNMP
community is defined. There are two definition options:
• IP Address - Define the management station IP address.
• All - which includes all management station IP addresses.
Defines the password used to authenticate the management station to the device.
which enables SNMP Basic mode for a selected community and contains the
following fields:
Access Mode - Defines the access rights of the community. The possible field
values are:
• Read Only - which indicates management access is restricted to read-only,
and changes cannot be made to the community.
• Read Write - management access is read-write and changes can be made to
the device configuration, but not to the community.
• SNMP Admin - user has access to all device configuration options, as well as
permissions to modify the community.
View Name - contains a list of user-defined SNMP views.
Enables SNMP Advanced Mode for a selected community and contains the
following fields:
Group Name - defines advanced SNMP communities group names.
button when you want to add the Communities configuration to the respective Table at the
-12
User's Manual of WGSW-24020/WGSW-48040