Sntp Anycast Client Enable; Sntp Client Enable (Interface) - Planet Networking & Communication WSGW-24020 User Manual

Console (config)#sntp broadcast client enable

5.5.10 sntp anycast client enable

The sntp anycast client enable global configuration command enables anycast client. To disable the polling for SNTP
broadcast client, use the no form of this command.
Syntax
sntp anycast client enable
no sntp anycast client enable
This command has no arguments or keywords.
Default Configuration
Disabled
Command Mode
Global configuration
User Guidelines
Polling time is determined by the sntp client poll timer global configuration command.
Use the sntp client enable interface configuration command to enable sntp client on specific interface.
Examples
The following example enables anycast clients.
Console (config-if)# sntp anycast client enable

5.5.11 sntp client enable (interface)

The sntp client enable interface configuration command enables the Simple Network Time Protocol (SNTP) client on an
interface. To disable the SNTP client, use the no form of this command.
Syntax
sntp client enable
no sntp client enable
This command has no arguments or keywords.
Default Configuration
Disabled
User's Manual of WGSW-24020/WGSW-48040
-17