Dot1X Auth-Not-Req - Planet Networking & Communication WSGW-24020 User Manual

EapolRespFramesRx: 6
EapolReqIdFramesTx: 3
EapolReqFramesTx: 6
InvalidEapolFramesRx: 0
EapLengthErrorFramesRx: 0
LastEapolFrameVersion: 1
LastEapolFrameSource: 0008.3b79.8787
The following table describes the significant fields shown in the display:
Field
EapolFramesRx
EapolFramesTx
EapolStartFramesRx
EapolLogoffFramesRx
EapolRespIdFramesRx
EapolRespFramesRx
EapolReqIdFramesTx
EapolReqFramesTx
InvalidEapolFramesRx
EapLengthErrorFramesRx
LastEapolFrameVersion
LastEapolFrameSource

5.29.15 dot1x auth-not-req

The dot1x auth-not-req interface VLAN configuration command enables unauthorized users access to that VLAN. Use the no
form of this command to disable the access.
Syntax
dot1x auth-not-req
Description
The number of valid EAPOL frames of any type that have been received by this
Authenticator.
The number of EAPOL frames of any type that have been transmitted by this
Authenticator.
The number of EAPOL Start frames that have been received by this Authenticator.
The number of EAPOL Logoff frames that have been received by this Authenticator.
The number of EAP Resp/Id frames that have been received by this Authenticator.
The number of valid EAP Response frames (other than Resp/Id frames) that have
been received by this Authenticator.
The number of EAP Req/Id frames that have been transmitted by this Authenticator.
The number of EAP Request frames (other than Rq/Id frames) that have been
transmitted by this Authenticator.
The number of EAPOL frames that have been received by this Authenticator in which
the frame type is not recognized.
The number of EAPOL frames that have been received by this Authenticator in which
the Packet Body Length field is invalid.
The protocol version number carried in the most recently received EAPOL frame.
The source MAC address carried carried in the most recently received EAPOL frame.
User's Manual of WGSW-24020/WGSW-48040
-36