Show Bridge Multicast Filtering - Planet Networking & Communication WSGW-24020 User Manual

Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, multicast MAC address table information is displayed.
console # show bridge multicast address-table
Vlan MAC Address
------ --------------------
1 0100.5e02.0203
19 0100.5e02.0208
19 0100.5e02.0208
Forbidden ports for multicast addresses:
Vlan MAC Address
------- --------------------
1 0100.5e02.0203
19 0100.5e02.0208
console # show bridge multicast address-table format ip
Vlan IP Address
-------- ------------------
1 224-239.130|2.2.3
19 224-239.130|2.2.8
19 224-239.130|2.2.8
Forbidden ports for multicast addresses:
Vlan IP Address
------ ---------------
1 224-239.130|2.2.3
19 224-239.130|2.2.8

5.4.17 show bridge multicast filtering

The show bridge multicast filtering privileged EXEC command displays the multicast filtering configuration.
Syntax
show bridge multicast filtering vlan-id
vlan_id — A valid VLAN ID value.
Default Configuration
This command has no default configuration.
Type Ports
-------- ----------
static e1, g2
static e1-8
dynamic e9-11
Ports
----------
e8
e8
Type Ports
------------ ----------
static e1,g2
static e1-8
dynamic e9-11
Ports
----------
e8
e8
-17
User's Manual of WGSW-24020/WGSW-48040