The page contains the following fields:
Instance Configuration
Press the VLAN Instance Configuration button, a new window popup. Assgin selected VLAN to specify MST Instance at the
VLAN Instatnce Configuration page. The screen in Figure 4-54 appears.
Instance ID
Included VLANs
Where maps the selected VLAN to the selected instance. Each VLAN belongs to one instance.
Included VLAN
Instance Settings
Bridge Priority
Designated Root Bridge ID
Root Port
Root Path Cost
Bridge ID
Remaining Hops
Figure 4-54 MSTP VLAN Instance Configuration screen
Defines the VLAN group to which the interface is assigned.
Specifies the selected spanning tree instance device priority. The field range is
0-61440.
which indicates the ID of the bridge with the lowest path cost to the instance ID.
Where indicates the selected instance's root port.
Indicates the selected instance's path cost.
Indicates the bridge ID of the selected instance.
Indicates the number of hops remaining to the next destination.
-10
User's Manual of WGSW-24020/WGSW-48040