Planet Networking & Communication WSGW-24020 User Manual page 48

RMON History
• Source Interface
• Sampling Interval
• Sampling
Requested
• Current Number of
Samples
• Owner
Use the button when you add the configured RMON sampling to the Log Table at the bottom of the screen
Add to List
RMON History Table
The RMON History screen (see figure 4-20) contains interface specific statistical network samplings. Each table entry
represents all counter values compiled during a single sample.
Displays the interface from which the history samples were taken. The possible
field values are:
Port, specifies the port from which the RMON information was taken.
LAG, specifies the port from which the RMON information was taken.
Indicates (in seconds) the time that samplings are taken from the ports. The field
range is 1-3600. The default is 1800 seconds (equal to 30 minutes)
Displays the number of samples to be saved. The field range is 1-65535.
The default value is 50.
Displays the current number of samples taken. View History button. This button
opens the RMON History screen.
Where displays the RMON station or user that requested the RMON information.
The field range is 0-20 characters.
Figure 4-20 RMON History Table screen
-48-
User's Manual of WGSW-24020/WGSW-48040