Table of Contents
Advertisement
the standards, set them all to inactive.
Example
The following example enters the context of port-channel number 1.
Console (config)# interface port-channel 1
5.15.2 interface range port-channel
The interface range port-channel global configuration command enters the interface configuration mode to configure multiple
port-channels.
Syntax
interface range port-channel {port-channel-range | all}
port-channel-range — List of port-channels to configure. Separate non-consecutive port-channels with a comma and no
spaces. A hyphen designates a range of port-channels.
all — All the channel-ports.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Commands under the interface range context are executed independently on each interface in the range. If the command
returns an error on one of the interfaces, it stops the execution of the command on subsequent interfaces.
Example
The following example shows how port-channels 1, 2 and 8 are grouped to receive the same command.
Console (config)# interface range port-channel 1-2
Console (config-if)#
5.15.3 channel-group
The channel-group interface configuration command associates a port with a port-channel. To remove a port from a port
channel, use the no form of this command.
Syntax
channel-group port-channel-number mode {on | auto}
User's Manual of WGSW-24020/WGSW-48040
-24
Advertisement
Table of Contents
