Planet Networking & Communication WSGW-24020 User Manual page 71

The Page contains the following fields:
IP Address
Priority
Authentication Port
Number of Retries
Timeout for Reply
Dead Time
Key String
Source IP Address
Usage Type
Use the button when you add the RADIUS configuration to the RADIUS Table at the bottom of the screen.
Add to List
The Authentication Server IP address.
Displays the server priority. The possible values are 0-65535, where 1 is the
highest value. The RADIUS Server priority is used to configure the server query
order.
Identifies the authentication port. The authentication port is used to verify the
RADIUS server authentication. The authenticated port default is 1812.
Defines the number of transmitted requests sent to RADIUS server before a failure
occurs. The possible field values are 1 - 10. 3 is the default value.
This defines the amount of the time in seconds the device waits for an answer from
the RADIUS server before retrying the query, or switching to the next server.
The possible field values are 1 - 30. 3 is the default value.
This defines the amount of time (minutes) that a RADIUS server is bypassed for
service requests. The range is 0-2000. The Dead Time default is 0 minutes.
This defines the default key string used for authenticating and encrypting all
RADIUS communications between the device and the RADIUS server.
This key must match the RADIUS encryption.
Defines the source IP address that is used for communication with RADIUS
servers.
Specifies the RADIUS server authentication type. The default value is Login. The
possible field values are:
• Login, indicates that the RADIUS server is used for authenticating user name
and passwords.
• 802.1X, indicates that the RADIUS server is used for 802.1X authentication.
• All, where indicates that the RADIUS server is used for authenticating user
name and passwords, and 802.1X port authentication.
-71-
User's Manual of WGSW-24020/WGSW-48040