View Type
Use the
screen.
4.11.3 Group Profile
The Group Profile screen (see figure 4-63) provides information for creating SNMP groups and assigning SNMP access control
privileges to SNMP groups. Groups allow network managers to assign access rights to specific device features, or features
aspects.
The page contains the following fields:
Group Name
Security Model
Security Level
This indicates if the defined OID branch will be included or excluded in the
selected SNMP view.
button when you want to add the Views configuration to the Views Table at the bottom of the
Figure 4-63 Group Profile screen
Displays the user-defined group to which access control rules are applied. The
field range is up to 30 characters.
Defines the SNMP version attached to the group. The possible field values are:
• SNMPv1, defined for the group.
• SNMPv2, defined for the group.
• SNMPv3, defined for the group.
Defines the security level attached to the group. Security levels apply to SNMPv3
only. The possible field values are:
• No Authentication, which indicates that neither the Authentication nor the
Privacy security levels are assigned to the group.
User's Manual of WGSW-24020/WGSW-48040
-12