Ip Https Server - Planet Networking & Communication WSGW-24020 User Manual

Default Configuration
This default port number is 80.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command. However, specifying 0 as the port number will effectively disable HTTP access
to the device.
Example
The following example shows how the http port number is configured to 100.
Console (config)# ip http port 100

5.28.3 ip https server

The ip https server global configuration command enables the device to be configured from a secured browser. To disable this
function, use the no form of this command.
Syntax
ip https server
no ip https server
Default Configuration
The default for the device is disabled.
Command Mode
Global Configuration mode
User Guidelines
You must use the crypto certificate generate command to generate the HTTPS certificate.
Example
The following example enables the device to be configured from a browser.
Console (enable)# ip https server
User's Manual of WGSW-24020/WGSW-48040
-34